KTM 150 XC-W TPI 2020
Renamed KTM 150 XC-W for 2023.
Enduro / Racing

144cc
2-stroke
213.4lb
Weight without fuel
37.8in
Seat height
11.8in
Front travel
6spd
Gearbox
2020 KTM 150 XC-W TPI overview
The 2020 KTM 150 XC-W TPI is a 144cc 2-stroke cross-country bike with a 37.8″ seat that weighs 213.4 lb without fuel. It listed at $8,799 (US MSRP).
- Street—
- Trail—
- WoodsEnduro
- Rocks—
- Desert—
- Track—
The 2020 KTM 150 XC-W TPI is a 144 cc enduro race bike with a liquid-cooled, single-cylinder two-stroke engine and Transfer Port Injection. For 2020, it replaced the carbureted 150 XC-W with a new top end and electronically controlled oil injection instead of premix.
Read more
Its reworked chassis brought a new frame, longer subframe, bodywork, seat and fuel tank, plus a new exhaust, airbox, lower-mounted radiators and revised WP XPLOR settings. A six-speed transmission, hydraulic wet multiplate clutch, WP XPLOR 48 mm fork, WP PDS shock and stock skid plate round out the off-road equipment. It is not street legal in the US.
Who it's for
This bike suits advanced riders focused on enduro and racing, including experienced competitors who want a small-displacement two-stroke for off-road events. Its 8-out-of-10 skill rating and race-oriented setup make it a more appropriate choice for skilled riders than beginners. The tall seat and lack of US street legality also make it a dedicated off-road choice rather than a road-going dual-sport.
2020 KTM 150 XC-W TPI photos
2020 KTM 150 XC-W TPI specifications
Engine
- Displacement
- 144cc
- Stroke
- 2-stroke
- Fuel system
- Fuel injection
- Bore × stroke
- 58 × 54.5 mm
- Cooling
- Liquid
- Configuration
- Single-cylinder
- Engine lubrication
- Oil injection
- 2-stroke oil
- 2-stroke engine oil, JASO FD
- Gearbox oil
- 0.85 US qt (0.8 L)
- Gearbox oil type
- Engine oil (15W/50)
- Coolant
- 1.3 US qt (1.2 L)
Clutch
- Type
- Wet multiplate
- Actuation
- Hydraulic
Drivetrain
- Starting
- Electric and kick
- Transmission
- 6-speed
- Chain size
- 520
- Front sprocket
- 13T
- Rear sprocket
- 50T
Dimensions
- Weight without fuel
- 213.4 lb
- Seat height
- 37.8″
- Ground clearance
- 14.6″
- Wheelbase
- 58.4″
- Fuel capacity
- 2.25 gal
Frame & steering
- Frame material
- Chromoly
- Architecture
- Central tube
- Rake
- 26.5°
Suspension
- Front
- WP XPLOR 48 mm fork
- Front travel
- 11.8″
- Rear
- WP PDS shock
- Rear travel
- 12.2″
Wheels & tires
- Front wheel
- 21″
- Rear wheel
- 18″
- Front tire
- Dunlop Geomax AT81F 90/90-21 54M TT
- Rear tire
- Dunlop Geomax AT81 110/100-18 64M TT
Brakes
- Front disc
- 260 mm
- Rear disc
- 220 mm
Stock features
- Skid plate
- Yes
- Radiator fan
- No
- Street legal (US)
- No
Battery / electrical
- Battery
- Yes
- OEM battery
- HJTZ5S-FP
- Chemistry
- Lithium
- Voltage
- 12V
- Capacity
- 2 Ah
2020 KTM 150 XC-W TPI maintenance
From the maker's manuals. Tap a row to see the manual page.
Maintenance schedule (PDF)Service intervals
- Change gearbox oil (first time)
- After 5 hours
- Change gearbox oil
- Every 40 hours
- Change gearbox oil
- Every 10 hours (when used for motorsports)
- Clean air filter
- Every 20 hours
- Clean air filter
- Every 10 hours (when used for motorsports)
- Inspect air filter
- Check the air filter approx. every 30 minutes (difficult operating conditions)
- Change spark plug
- Every 40 hours
- Change spark plug
- Every 10 hours (when used for motorsports)
- Change piston
- Every 40 hours
- Change piston
- Every 10 hours (when used for motorsports)
- Change piston
- Every 10 hours (regular use in sand)
Spark plug
- Spark plug
- NGK T40199D-G12
- Plug gap
- 0.0472 in (1.20 mm)
Torque specs
- Gearbox oil drain plug
- 15 ft‑lb (20 N·m)
- Spark plug
- 18 ft‑lb (25 N·m)
- Front axle
- 26 ft‑lb (35 N·m)
- Front axle pinch bolts
- 11 ft‑lb (15 N·m)
- Rear axle nut
- 59 ft‑lb (80 N·m)
- Upper triple clamp bolts
- 15 ft‑lb (20 N·m)
- Lower triple clamp bolts
- 11 ft‑lb (15 N·m)
- Steering stem bolt
- 8.9 ft‑lb (12 N·m)
- Handlebar clamp bolts
- 15 ft‑lb (20 N·m)
- Front brake caliper mounting bolts
- 18 ft‑lb (25 N·m)
- Front brake disc bolts
- 10 ft‑lb (14 N·m)
- Rear brake disc bolts
- 10 ft‑lb (14 N·m)
- Rear sprocket nuts
- 26 ft‑lb (35 N·m)
- Shock absorber mounting bolts
- 59 ft‑lb (80 N·m)
- Coolant drain bolt
- 7.4 ft‑lb (10 N·m)
2020 KTM 150 XC-W TPI rivals
The closest bikes to the 2020 KTM 150 XC-W TPI by use, engine and size. Differences are against the 150 XC-W TPI.

KTM
2016 200 XC-W
193cc · 2-stroke
- MSRP
- $7,799
- Seat height
- 37.8″same
- Weight without fuel
- 219.4 lb+6 lb
KTM 150 XC-W TPI FAQ
What engine does the 2020 KTM 150 XC-W TPI have?
It has a liquid-cooled, single-cylinder two-stroke engine with Transfer Port Injection.
What seat height does the 2020 KTM 150 XC-W TPI have?
The seat height is 37.8 in.
How much does the 2020 KTM 150 XC-W TPI weigh?
Its weight without fuel is 213.4 lb.
How much suspension travel does the 2020 KTM 150 XC-W TPI have?
Front travel is 11.8 in, and rear travel is 12.2 in.
What is the fuel capacity of the 2020 KTM 150 XC-W TPI?
The fuel capacity is 2.25 gal.
Does the 2020 KTM 150 XC-W TPI require premix?
No. It uses electronically controlled oil injection instead of premix.
Is the 2020 KTM 150 XC-W TPI street legal in the US?
It is not street legal in the US.
What was the MSRP of the 2020 KTM 150 XC-W TPI?
The MSRP was $8,799.
What size tires does the 2020 KTM 150 XC-W TPI use?
90/90-21 front and 110/100-18 rear.
What spark plug does the 2020 KTM 150 XC-W TPI take?
NGK T40199D-G12, gapped 0.0472 in (1.20 mm).
What chain and sprockets does the 2020 KTM 150 XC-W TPI use?
A 520 chain on a 13-tooth front and 50-tooth rear sprocket.
How much gearbox oil does the 2020 KTM 150 XC-W TPI take?
0.85 US qt (0.8 L) of engine oil (15W/50).
Other KTM 150 XC-W TPI model years
Specs from KTM's owner's manual and published spec sheets. Updated .