KTM 250 XC TPI 2020
Cross Country / Racing

249cc
2-stroke
223.3lb
Weight without fuel
37.4in
Seat height
12.2in
Front travel
6spd
Gearbox
2020 KTM 250 XC TPI overview
The 2020 KTM 250 XC TPI is a 249cc 2-stroke cross-country bike with a 37.4″ seat that weighs 223.3 lb without fuel. It listed at $9,799 (US MSRP).
- Street—
- Trail—
- WoodsCross Country
- Rocks—
- Desert—
- Track—
The 2020 KTM 250 XC TPI is a cross-country race bike with a 249 cc, liquid-cooled, single-cylinder two-stroke engine. Its TPI transfer-port fuel injection and oil injection replace the carburetor and premix, with an ambient air-pressure sensor for altitude adjustment.
Read more
Built on the SX chassis introduced for 2019, it has a six-speed transmission, electric start, a 2.25 gal fuel capacity and a 37.4 in seat height. For 2020, the XC gets a new exhaust with a corrugated header, revised WP XACT air-fork settings and damping piston, and a new shock compression adjuster. Suspension travel is 12.2 in front and 11.8 in rear. Standard equipment includes a sidestand and ignition-map plug-in connector.
Who it's for
This bike suits advanced cross-country racers and riders who want a two-stroke for cross-country racing. Its 249 cc engine, six-speed transmission and 223.3-lb weight without fuel make it a fit for experienced riders who can manage a competition-focused machine; the 37.4 in seat height is also an important fit consideration.
2020 KTM 250 XC TPI photos
2020 KTM 250 XC TPI specifications
Engine
- Displacement
- 249cc
- Stroke
- 2-stroke
- Fuel system
- Fuel injection
- Bore × stroke
- 66.4 × 72 mm
- Cooling
- Liquid
- Configuration
- Single-cylinder
- Engine lubrication
- Oil injection
- 2-stroke oil
- 2-stroke engine oil, JASO FD
- Gearbox oil
- 0.85 US qt (0.8 L)
- Gearbox oil type
- Engine oil (15W/50)
- Coolant
- 1.3 US qt (1.2 L)
Clutch
- Type
- Wet multiplate
- Actuation
- Hydraulic
- Spring
- Diaphragm
Drivetrain
- Starting
- Electric
- Transmission
- 6-speed
- Chain size
- 520
- Front sprocket
- 13T
- Rear sprocket
- 51T
Dimensions
- Weight without fuel
- 223.3 lb
- Seat height
- 37.4″
- Ground clearance
- 14.6″
- Wheelbase
- 58.5″
- Fuel capacity
- 2.25 gal
Equipment
- Sidestand
- Standard
- Ignition-map plug-in connector
- Standard
Frame & steering
- Frame material
- Chromoly
- Architecture
- Central tube
- Rake
- 26.1°
Suspension
- Front
- WP XACT AER 48 mm air fork
- Front travel
- 12.2″
- Rear
- WP XACT linkage shock
- Rear travel
- 11.8″
Wheels & tires
- Front wheel
- 21″
- Rear wheel
- 18″
- Front tire
- Dunlop Geomax AT81F 80/100-21 51M TT
- Rear tire
- Dunlop Geomax AT81 110/100-18 64M TT
Brakes
- Front disc
- 260 mm
- Rear disc
- 220 mm
Stock features
- Street legal (US)
- No
Battery / electrical
- Battery
- Yes
- OEM battery
- HJTZ5S-FP-C
- Chemistry
- Lithium
- Voltage
- 12V
- Capacity
- 2 Ah
2020 KTM 250 XC TPI maintenance
From the maker's manuals. Tap a row to see the manual page.
Maintenance schedule (PDF)Service intervals
- Change gearbox oil (first time)
- After 5 hours
- Change gearbox oil
- Every 40 hours
- Clean air filter
- Every 10 hours
- Inspect air filter
- Check the air filter approx. every 30 minutes (difficult operating conditions)
- Change spark plug
- Every 20 hours
- Change piston
- Every 10 hours (regular use in sand)
- Change piston
- Every 80 hours
Spark plug
- Spark plug
- NGK BR 7 ES
- Plug gap
- 0.024 in (0.6 mm)
Torque specs
- Gearbox oil drain plug
- 15 ft‑lb (20 N·m)
- Spark plug
- 18 ft‑lb (25 N·m)
- Front axle
- 26 ft‑lb (35 N·m)
- Front axle pinch bolts
- 11 ft‑lb (15 N·m)
- Rear axle nut
- 59 ft‑lb (80 N·m)
- Upper triple clamp bolts
- 13 ft‑lb (17 N·m)
- Lower triple clamp bolts
- 8.9 ft‑lb (12 N·m)
- Steering stem bolt
- 8.9 ft‑lb (12 N·m)
- Handlebar clamp bolts
- 15 ft‑lb (20 N·m)
- Front brake caliper mounting bolts
- 18 ft‑lb (25 N·m)
- Front brake disc bolts
- 10 ft‑lb (14 N·m)
- Rear brake disc bolts
- 10 ft‑lb (14 N·m)
- Rear sprocket nuts
- 26 ft‑lb (35 N·m)
- Front sprocket bolt
- 44 ft‑lb (60 N·m)
- Shock absorber bottom mount
- 44 ft‑lb (60 N·m)
- Shock absorber top mount
- 44 ft‑lb (60 N·m)
2020 KTM 250 XC TPI rivals
The closest bikes to the 2020 KTM 250 XC TPI by use, engine and size. Differences are against the 250 XC TPI.

GasGas
2024 EX 300
293cc · 2-stroke
- MSRP
- $10,599
- Seat height
- 37.6″+0.2″
- Weight without fuel
- 226.2 lb+2.9 lb
- Power
- 50.1 hp

KTM
2020 300 XC TPI
293cc · 2-stroke
- MSRP
- $9,999+$200
- Seat height
- 37.4″same
- Weight without fuel
- 223.3 lbsame
- Power
- —

KTM
2016 200 XC-W
193cc · 2-stroke
- MSRP
- $7,799
- Seat height
- 37.8″+0.4″
- Weight without fuel
- 219.4 lb−3.9 lb
- Power
- —
KTM 250 XC TPI FAQ
What engine does the 2020 KTM 250 XC TPI have?
It has a 249 cc, liquid-cooled, single-cylinder two-stroke engine with TPI fuel injection and oil injection.
Does the 2020 KTM 250 XC TPI require premix?
No. Its oil-injection system supplies two-stroke oil, so the fuel does not need premix.
What oil does the 2020 KTM 250 XC TPI use in its gearbox?
It uses 15W/50 engine oil, with a gearbox oil capacity of 0.85 qt.
How tall is the seat on the 2020 KTM 250 XC TPI?
The seat height is 37.4 in.
How much does the 2020 KTM 250 XC TPI weigh?
It weighs 223.3 lb without fuel.
What is the suspension travel on the 2020 KTM 250 XC TPI?
It has 12.2 in of front travel and 11.8 in of rear travel.
How much fuel does the 2020 KTM 250 XC TPI hold?
Fuel capacity is 2.25 gal.
Is the 2020 KTM 250 XC TPI street legal in the US?
It is not street legal in the US.
What was the MSRP of the 2020 KTM 250 XC TPI?
The MSRP was $9,799.
What size tires does the 2020 KTM 250 XC TPI use?
80/100-21 front and 110/100-18 rear.
What spark plug does the 2020 KTM 250 XC TPI take?
NGK BR 7 ES, gapped 0.024 in (0.6 mm).
What chain and sprockets does the 2020 KTM 250 XC TPI use?
A 520 chain on a 13-tooth front and 51-tooth rear sprocket.
Other KTM 250 XC TPI model years
Specs from KTM's owner's manual and published spec sheets. Updated .