KTM 250 XC-W TPI 2018
Renamed KTM 250 XC-W for 2023.
Enduro / Racing

249cc
2-stroke
227.1lb
Weight without fuel
37.8in
Seat height
11.8in
Front travel
6spd
Gearbox
2018 KTM 250 XC-W TPI overview
The 2018 KTM 250 XC-W TPI is a 249cc 2-stroke cross-country bike with a 37.8″ seat that weighs 227.1 lb without fuel. It listed at $9,399 (US MSRP).
- Street—
- Trail—
- WoodsEnduro
- Rocks—
- Desert—
- Track—
The 2018 KTM 250 XC-W TPI is an enduro race bike and the first fuel-injected two-stroke KTM sold in the US. Its 249 cc liquid-cooled single uses Transfer Port Injection, with two injectors in the rear transfer ports, a 39 mm Dell’Orto throttle body and a separate electronic oil pump instead of premix.
Read more
KTM sold it in limited numbers alongside the carbureted 250 XC-W. The 2018 model pairs electric start with a kick starter and a 6-speed transmission. The chromoly-frame chassis has a WP XPLOR 48 mm fork with 11.8 in of travel and a WP PDS rear shock with 12.2 in. Seat height is 37.8 in, weight without fuel is 227.1 lb, and the fuel capacity is 2.4 gal. It is built for enduro and racing use, not street-legal riding in the US.
Who it's for
This bike is for advanced riders who want a two-stroke for enduro riding or racing. Its 249 cc engine, 37.8 in seat height and 227.1 lb weight without fuel suit experienced riders comfortable managing a tall, competition-oriented off-road machine. The TPI system and separate oil pump distinguish it from the carbureted 250 XC-W offered alongside it in 2018.
2018 KTM 250 XC-W TPI photos
2018 KTM 250 XC-W TPI specifications
Engine
- Displacement
- 249cc
- Stroke
- 2-stroke
- Fuel system
- Fuel injection
- Bore × stroke
- 66.4 × 72 mm
- Cooling
- Liquid
- Configuration
- Single-cylinder
- Engine lubrication
- Oil injection
- 2-stroke oil
- 2-stroke engine oil, JASO FD
- Gearbox oil
- 0.85 US qt (0.8 L)
- Gearbox oil type
- Engine oil (15W/50)
- Coolant
- 1.3 US qt (1.2 L)
Clutch
- Type
- Wet multiplate
- Actuation
- Hydraulic
- Spring
- Diaphragm
Drivetrain
- Starting
- Electric and kick
- Transmission
- 6-speed
- Chain size
- 520
- Front sprocket
- 13T
- Rear sprocket
- 50T
Dimensions
- Weight without fuel
- 227.1 lb
- Seat height
- 37.8″
- Ground clearance
- 14.6″
- Wheelbase
- 58.4″
- Fuel capacity
- 2.4 gal
Frame & steering
- Frame material
- Chromoly
- Architecture
- Central tube
- Rake
- 26.5°
Suspension
- Front
- WP XPLOR 48 mm fork
- Front travel
- 11.8″
- Rear
- WP PDS shock
- Rear travel
- 12.2″
Wheels & tires
- Front wheel
- 21″
- Rear wheel
- 18″
- Front tire
- Dunlop Geomax AT81F 90/90-21 54M TT
- Rear tire
- Dunlop Geomax AT81 110/100-18 64M TT
Brakes
- Front disc
- 260 mm
- Rear disc
- 220 mm
Stock features
- Skid plate
- No
- Radiator fan
- No
- Street legal (US)
- No
Battery / electrical
- Battery
- Yes
- OEM battery
- HJTZ5S-FP
- Chemistry
- Lithium
- Voltage
- 12V
- Capacity
- 2 Ah
2018 KTM 250 XC-W TPI maintenance
From the maker's manuals. Tap a row to see the manual page.
Maintenance schedule (PDF)Service intervals
- Change gearbox oil (first time)
- After 5 hours
- Change gearbox oil
- Every 40 hours
- Clean air filter
- Every 20 hours
- Clean air filter
- Every 10 hours (when used for motorsports)
- Inspect air filter
- Check the air filter approx. every 30 minutes (difficult operating conditions)
- Change spark plug
- Every 40 hours
- Change piston
- Every 80 hours
- Change piston
- Every 40 hours (when used for motorsports)
- Change piston
- Every 10 hours (regular use in sand)
Spark plug
- Spark plug
- NGK ZGR 7 G1
- Plug gap
- 0.051 in (1.3 mm)
Torque specs
- Gearbox oil drain plug
- 15 ft‑lb (20 N·m)
- Spark plug
- 18 ft‑lb (25 N·m)
- Front axle
- 26 ft‑lb (35 N·m)
- Front axle pinch bolts
- 11 ft‑lb (15 N·m)
- Rear axle nut
- 59 ft‑lb (80 N·m)
- Upper triple clamp bolts
- 15 ft‑lb (20 N·m)
- Lower triple clamp bolts
- 11 ft‑lb (15 N·m)
- Steering stem bolt
- 8.9 ft‑lb (12 N·m)
- Handlebar clamp bolts
- 15 ft‑lb (20 N·m)
- Front brake caliper mounting bolts
- 18 ft‑lb (25 N·m)
- Front brake disc bolts
- 10 ft‑lb (14 N·m)
- Rear brake disc bolts
- 10 ft‑lb (14 N·m)
- Rear sprocket nuts
- 26 ft‑lb (35 N·m)
- Front sprocket bolt
- 44 ft‑lb (60 N·m)
- Shock absorber mounting bolts
- 59 ft‑lb (80 N·m)
- Coolant drain bolt
- 7.4 ft‑lb (10 N·m)
2018 KTM 250 XC-W TPI rivals
The closest bikes to the 2018 KTM 250 XC-W TPI by use, engine and size. Differences are against the 250 XC-W TPI.

KTM
2018 300 XC-W
293cc · 2-stroke
- MSRP
- $9,299−$100
- Seat height
- 37.8″same
- Weight without fuel
- 220.5 lb−6.6 lb

KTM
2016 200 XC-W
193cc · 2-stroke
- MSRP
- $7,799−$1,600
- Seat height
- 37.8″same
- Weight without fuel
- 219.4 lb−7.7 lb
KTM 250 XC-W TPI FAQ
What engine does the 2018 KTM 250 XC-W TPI have?
It has a 249 cc, liquid-cooled, single-cylinder two-stroke engine with Transfer Port Injection.
Does the 2018 KTM 250 XC-W TPI use premix?
No. Its electronic oil pump feeds two-stroke oil from a separate tank, so it does not use premix.
What is the seat height of the 2018 KTM 250 XC-W TPI?
The seat height is 37.8 in.
How much does the 2018 KTM 250 XC-W TPI weigh?
It weighs 227.1 lb without fuel.
How much suspension travel does the 2018 KTM 250 XC-W TPI have?
It has 11.8 in of front travel and 12.2 in of rear travel.
What is the fuel capacity of the 2018 KTM 250 XC-W TPI?
The fuel capacity is 2.4 gal.
Is the 2018 KTM 250 XC-W TPI street legal?
It is not street legal in the US.
What was the MSRP of the 2018 KTM 250 XC-W TPI?
The MSRP was $9,399.
What size tires does the 2018 KTM 250 XC-W TPI use?
90/90-21 front and 110/100-18 rear.
What spark plug does the 2018 KTM 250 XC-W TPI take?
NGK ZGR 7 G1, gapped 0.051 in (1.3 mm).
What chain and sprockets does the 2018 KTM 250 XC-W TPI use?
A 520 chain on a 13-tooth front and 50-tooth rear sprocket.
How much gearbox oil does the 2018 KTM 250 XC-W TPI take?
0.85 US qt (0.8 L) of engine oil (15W/50).
Other KTM 250 XC-W TPI model years
Specs from KTM's owner's manual and published spec sheets. Updated .