FMDB

KTM 250 XCF-W 2016

2016Advanced · 7/10

Enduro

2016 KTM 250 XCF-W

250cc

4-stroke

232.6lb

Weight without fuel

38.2in

Seat height

11.8in

Front travel

6spd

Gearbox

2016 KTM 250 XCF-W overview

The 2016 KTM 250 XCF-W is a 250cc 4-stroke enduro bike with a 38.2″ seat that weighs 232.6 lb without fuel. It listed at $8,599 (US MSRP).

Where it rides
  • Street
  • Trail
  • Woods
  • Rocks
  • Desert
  • Track

The 2016 KTM 250 XCF-W is an enduro bike with a fuel-injected, liquid-cooled 250 cc four-stroke single, DOHC four-valve head, six-speed transmission and hydraulically operated clutch. It has a WP 48 mm upside-down fork with 11.8 in of travel and a WP PDS shock with 13.2 in of rear travel.

Read more

Seat height is 38.2 in, weight without fuel is 232.6 lb, and fuel capacity is 2.25 gal. A spark arrester, sidestand and radiator fan are standard. For 2016, KTM revised the front axle from 26 mm to 22 mm and reduced its offset from 35 mm to 33 mm for more trail. Other updates include new suspension settings and fork guards, a skid plate, an orange anodized rear sprocket, an orange front mask, a Selle Dalla Valle seat cover and new graphics. This was the last 250 four-stroke XCF-W in KTM's US enduro lineup.

Who it's for

This enduro bike suits advanced riders who want a lightweight 250 four-stroke for enduro riding. Its 232.6 lb weight without fuel and 38.2 in seat height are concrete fit considerations, while the six-speed transmission, electric and kick starting, and 2.25 gal fuel capacity support off-road use. It is aimed at experienced enduro riders rather than beginners seeking a lower seat or a simpler bike.

2016 KTM 250 XCF-W photos

2016 KTM 250 XCF-W specifications

Engine

Displacement
250cc
Stroke
4-stroke
Fuel system
Fuel injection
Bore × stroke
78 × 52.3 mm
Compression
12.8:1
Cooling
Liquid
Configuration
Single-cylinder
Valve train
DOHC
Valves
4
Engine oil
1.1 US qt (1.0 L)
Oil type
10W/50
Coolant
1.3 US qt (1.2 L)

Clutch

Type
Wet multiplate
Actuation
Hydraulic
Assist
None (standard clutch)
Spring
Diaphragm

Drivetrain

Starting
Electric and kick
Transmission
6-speed
Chain size
520
Front sprocket
13T
Rear sprocket
52T

Dimensions

Weight without fuel
232.6 lb
Seat height
38.2″
Ground clearance
13.6″
Wheelbase
58.4″
Fuel capacity
2.25 gal

Equipment

Spark arrester
Standard
Handguards
Standard
Sidestand
Standard

Frame & steering

Frame material
Chromoly
Architecture
Central tube
Rake
26.5°

Suspension

Front
WP 48 mm upside-down fork
Front travel
11.8″
Rear
WP PDS shock
Rear travel
13.2″

Wheels & tires

Front wheel
21″
Rear wheel
18″
Front tire
Dunlop Geomax AT81F 90/90-21 54M TT
Rear tire
Dunlop Geomax AT81 110/100-18 64M TT

Brakes

Front disc
260 mm
Rear disc
220 mm

Stock features

Skid plate
Yes
Radiator fan
Yes

Battery / electrical

Battery
Yes
OEM battery
YTX4L-BS
Chemistry
Lead acid
Voltage
12V
Capacity
3 Ah

2016 KTM 250 XCF-W maintenance

From the maker's manuals. Tap a row to see the manual page.

Maintenance schedule (PDF)

Service intervals

Change engine oil (first time)
After 1 hour
Change engine oil
Every 15 hours
Change engine oil
Every race
Change oil filter (first time)
After 1 hour
Change oil filter
Every 15 hours
Change oil filter
Every race
Clean air filter
Every 15 hours
Clean air filter
Every race
Inspect air filter
Check the air filter approx. every 30 minutes (difficult riding conditions)
Change spark plug
Every 135 hours
Change spark plug
Every 70 hours (after sporting use)
Change piston and rings
Every 135 hours
Change piston and rings
Every 70 hours (after sporting use)

Spark plug

Spark plug
NGK LMAR9AI-10
Plug gap
0.039 in (1.0 mm)

Torque specs

Oil drain bolt
15 ft‑lb (20 N·m)
Oil filter cover bolts
7.4 ft‑lb (10 N·m)
Spark plug
7.4–8.9 ft‑lb (10–12 N·m)
Front axle
33 ft‑lb (45 N·m)
Front axle pinch bolts
11 ft‑lb (15 N·m)
Rear axle nut
59 ft‑lb (80 N·m)
Upper triple clamp bolts
15 ft‑lb (20 N·m)
Lower triple clamp bolts
11 ft‑lb (15 N·m)
Steering stem bolt
8.9 ft‑lb (12 N·m)
Handlebar clamp bolts
15 ft‑lb (20 N·m)
Front brake caliper mounting bolts
18 ft‑lb (25 N·m)
Front brake disc bolts
10 ft‑lb (14 N·m)
Rear brake disc bolts
10 ft‑lb (14 N·m)
Rear sprocket nuts
26 ft‑lb (35 N·m)
Front sprocket bolt
44 ft‑lb (60 N·m)
Shock absorber top mount
59 ft‑lb (80 N·m)
Shock absorber bottom mount
59 ft‑lb (80 N·m)
Coolant drain bolt
7.4 ft‑lb (10 N·m)

2016 KTM 250 XCF-W vs 2015

New for 2016: a 22 mm front axle (was 26 mm) with its offset cut from 35 mm to 33 mm for more trail, new suspension settings, new fork guards, a skid plate, an orange anodized rear sprocket, an orange front mask, a Selle Dalla Valle seat cover and new graphics. The last 250 XCF-W: KTM's US enduro lineup had no 250 four-stroke XCF-W after 2016. None of the specs below changed from the 2015 model.

Spec20152016Changed
MSRP$8,599Same
Displacement250ccSame
Weight without fuel232.6 lbSame
Seat height38.2 inSame
Front travel11.8 inSame
Rear travel13.2 inSame
Fuel2.25 galSame
Gearbox6-speedSame
Front tireDunlop Geomax AT81F 90/90-21 54M TTSame
Rear tireDunlop Geomax AT81 110/100-18 64M TTSame

2016 KTM 250 XCF-W rivals

The closest bikes to the 2016 KTM 250 XCF-W by use, engine and size. Differences are against the 250 XCF-W.

Compare side by side

KTM 250 XCF-W FAQ

  1. What engine does the 2016 KTM 250 XCF-W have?

    It has a fuel-injected, liquid-cooled 250 cc four-stroke single-cylinder engine with DOHC and four valves.

  2. What is the seat height of the 2016 KTM 250 XCF-W?

    The seat height is 38.2 in.

  3. How much does the 2016 KTM 250 XCF-W weigh without fuel?

    It weighs 232.6 lb without fuel.

  4. How much suspension travel does the 2016 KTM 250 XCF-W have?

    It has 11.8 in of front travel and 13.2 in of rear travel.

  5. What is the fuel capacity of the 2016 KTM 250 XCF-W?

    The fuel capacity is 2.25 gal.

  6. What engine oil does the 2016 KTM 250 XCF-W use?

    It uses SAE 10W/50 engine oil, with a capacity of 1.1 US qt (1.0 L).

  7. What was the MSRP of the 2016 KTM 250 XCF-W?

    The MSRP was $8,599.

  8. What size tires does the 2016 KTM 250 XCF-W use?

    90/90-21 front and 110/100-18 rear.

  9. What spark plug does the 2016 KTM 250 XCF-W take?

    NGK LMAR9AI-10, gapped 0.039 in (1.0 mm).

  10. What chain and sprockets does the 2016 KTM 250 XCF-W use?

    A 520 chain on a 13-tooth front and 52-tooth rear sprocket.

  11. Is the 2016 KTM 250 XCF-W different from the 2015 model?

    Yes. New for 2016: a 22 mm front axle (was 26 mm) with its offset cut from 35 mm to 33 mm for more trail, new suspension settings, new fork guards, a skid plate, an orange anodized rear sprocket, an orange front mask, a Selle Dalla Valle seat cover and new graphics. The last 250 XCF-W: KTM's US enduro lineup had no 250 four-stroke XCF-W after 2016. None of the main specs changed from the 2015 model.

Other KTM 250 XCF-W model years

Specs from KTM's owner's manual and published spec sheets. Updated .